We use own and third party cookies. Continue browsing implies acceptance.More informationAccept

Materials / Cartridges

Materials and Applications Guide

Deflex has a broad set of thermoplastic polymers that are complementary in their properties and benefits. Beyond their different features, this set of polymeric materials shares a common genetic quality that can be observed in the low permeation of liquids, higher resistance than the conventional acrylic resins, and an outstanding elastic memory.

Guiding table to choose the material according to its main applications for removable dentures: 

  • Caja Frasco M10
  • Caja Frasco Classic
  • Caja Frasco Fluence
  • Caja Frasco Supra
  • Caja Frasco Acrilato
  • Caja Frasco Acetal
  • Caja Frasco Ossis
APPLICATIONS MATERIALS
Partial dentures CLASSIC SR  -  FLUENCE SR  -  SUPRA SF
In order, from the most rigid to the most flexible.
Select according to flexibility need of the denture.
More rigid dentures are easier to polish and shine.
Full dentures M10 XR  -  ACRILATO FD
Both with Chemical bond with Acrylic and very low shrinkage
Temporary dentures /
Occlusal splints
M10 XR  -  ACRILATO FD
Both with Chemical bond with the conventional Acrylic resin.
Aesthetic clasps ACETAL AC
Injectable acetal with tooth-colored retainers.
CLASSIC SR and FLUENCE SR can also be used to make translucent pink aesthetic retainers.
Partial denture frameworks ACETAL AC  -  OSSIS TI
ACETAL AC is easy to inject and polish.
OSSIS TI offers more resistance and stiffness.
Overdentures M10 XR  -  ACRILATO FD
Both with chemical bond with th conventional Acrylic resin.

M10 XR

M10 XR

Extra-rigid polymer
Greater stiffness and resistance Allows for reduced thickness.

Chemical bond with acrylic
Possibility of relining and additions using conventional materials and techniques.
Ideal for full dentures, overdentures and temporary dentures.

Minimal shrinkage
High fidelity in all applications.

Super easy polishing and bright shine
Saves working time. Optimal end result.

M10 XR

Colors

  • Soft pink
  • Translucent soft pink
  • Medium pink
  • Transparent


Diameters and dimensions

  • Small ø 22x55mm / 15,6g
  • Medium ø 22x85mm / 23,9g
  • Large ø 22x120mm / 32,3g
  • Small ø 25x50mm / 16,5g
  • Medium ø 25x70mm / 24g
  • Large ø 25x90mm / 30,8g
  • Nº 80383780003
Colors Tonality Translucency Indications for partial dentures
and/or full dentures
SP Mid Soft Very high Preferably RPDs
TSP Translucid Soft Very high Preferably RPDs
MP Medium Medium RPDs frameworks

Classic SR

Classic SR

CLASSIC SR

Semi-rigid polyamide


Recommended for all types of partial denture designs.
Recommended for all types of partial denture designs.

Occlusal rests
Made using the same polyamide.

High brightness and translucency

Classic SR

Colors

  • Palid pink
  • Soft pink
  • Medium pink
  • Dark pink
  • Transparent

Diameters and dimensions

  • Small ø 22x55mm / 15,6g
  • Medium ø 22x85mm / 23,9g
  • Large ø 22x120mm / 32,3g
  • Small ø 25x50mm / 16,5g
  • Medium ø 25x70mm / 24g
  • Large ø 25x90mm / 30,8g
  • K113608
  • Nº 80383789001
Colors Tonality Translucency Indications for partial dentures
and/or full dentures
PP Pale Very high Preferably RPDs
SP Soft Very high Preferably RPDs
MP Mid intense High RPD and Totals
DP Dark Medium RPD and Totals

Fluence SR

Fluence SR

Quality similar to Classic SR
More fluid injection
Slightly more flexible

Fluence SR

Colors

  • Medium Pink
  • Transparent

Diameters and dimensions

  • Small ø 22x55mm / 13,7g
  • Medium ø 22x85mm / 20,5g
  • Large ø 22x120mm / 27,3g
  • Small ø 25x50mm / 14g
  • Medium ø 25x70mm / 20,8g
  • Large ø 25x90mm / 26,5g
  • Nº 80383789002
Colors Tonality Translucency Indications for partial dentures
and/or full dentures
MP Medium High RPD and Totals

Supra SF

Supra SF

SUPRA SF

 

Semi-flexible polyamide

Medium flexibility
For clinical cases requiring more elasticity. For example, cases with divergent support teeth.

Very-high fracture resistance
Makes it possible to reduce thickness.

Extremely fluid injection

Supra SF

Color

  • Medium Pink

Diameters and dimensions

  • Small ø 22x55mm / 14g
  • Medium ø 22x85mm / 21,3g
  • Large ø 22x120mm / 29,6g
  • Small ø 25x50mm / 14,8g
  • Medium ø 25x70mm / 22,3g
  • Large ø 25x90mm / 28g
  • Nº 80383789003
Colors Tonality Translucency Indications for partial dentures
and/or full dentures
MP Medium Mid Low RPD and Totals

Acrilato FD

Acrilato FD

Full dentures more resistant and lighter than conventional acrylic.

Hypoallergenic

Very low shrinkage

Acrilato FD

Colors

  • Medium Pink
  • Transparent

Diameters and dimensions

  • Medium ø 22x85mm / 24g
  • Large ø 22x120mm / 32,8g
  • Medium ø 25x70mm / 24,5g
  • Large ø 25x90mm / 31,3g
  • K113788
  • Nº 80383780002
Colors Tonality Translucency Indications for partial dentures
and/or full dentures
MP Medium High For CDs only

ACETAL AC

ACETAL AC

Highly stable dimensional opaque acetal polymer.

Low level of absorption of liquids: it does not impregnate, it does not change the color.

Applications: tooth color aesthetic retainers and partial denture frameworks.

ACETAL AC

Diameters and dimensions

  • Small ø 22 / 13g (1 tablet)
  • Medium ø 22 / 26g (2 tablets)
  • Small ø 25 / 17,4g (1 tablet)
  • Medium ø 25 / 34,8g (2 tablets)

Ossis TI

Ossis TI

BENEFITS

  • High wear resistance (Non-abrasive to opposing teeth)
  • Withstands loads up to 3.6 GPa.
  • 100% metal free
  • Lightweight
  • Biocompatible and hypoallergenic
  • Composite resin coating
  • Bone-like hardness
  • Low chewing impact on dental implants


APPLICATIONS

  • Infra-structure bridges and crowns (up to 1-2 intermediate elements)
  • Anatomical structure of bridges and crowns (up to 1-2 intermediate elements)
  • Telescopic crowns and screw-retained crowns
  • Implant bar for overdentures
  • Hybrid prosthetics
  • RPD frameworks (freedom of design)
Ossis TI

Colors

  • Beige
  • Pink

Packed in plastic tubes of

  • 20g
  • 40g
Colors Tonality Translucency Indications for partial dentures
and/or full dentures
BE RPDs frameworks
MP RPDs frameworks

Colors

The Deflex materials stand out for its natural combination of translucency and pink hues, which allow dual adaptation to teeth and gums.

A subtle range of roses satisfies the diverse colors of patient’s gums.

M10 XR CLASSIC SR FLUENCE SR ACRILATO FD SUPRA SF
  • Pale Pink Pale Pink
  • Soft Pink Soft Pink
  • Translucid Pale Pink Translucid Pale Pink
  • Medium Pink Medium Pink
  • Dark Pink Dark Pink
  • Transparent Transparent
Note on transparent color: Materials in their transparent version are indicated preferably for occlusal splints. Their use is not recommended for partial or complete dentures, as these transparent dentures will reveal the shadows in the oral cavity.
ACETAL AC
  • A2
  • A3
  • A3,5
  • B3
  • C3
  • Medium Pink

Properties

Properties/materials Elasticity Hypo-allergenic Chemical bond with Acrylic
M10 XR Very low YES YES *
CLASSIC SR Low YES No
FLUENCE SR Low YES No
SUPRA SF Medium YES No
ACRILATO FD Medium YES ** YES *
ACETAL AC Very low YES No
OSSIS TI Super low YES No
(*) Important: Apt for additions and relines using conventional materials and techniques. (**) Meets the requirements of residual content of monomer established in EN ISO 20795-1_2013 (base polymers for dental prostheses)

Injection parameters

Materials / Parameters Temperature Injection time Holding time Air pressure
M10 XR 305ºC +/-10ºC 15’ min 1' min 6 kg/cm2 +/- 1
= 86 PSI +/- 14
CLASSIC SR 280ºC +/-10ºC 15’ min 1' min 6 kg/cm2 +/- 1
= 86 PSI +/- 14
FLUENCE SR 275ºC +/-10ºC 15’ min 1' min 4,5 kg/cm2 +/- 0,5
= 64 PSI +/- 7
SUPRA SF 260ºC +/-10ºC 12’ min 1' min 3,5 kg/cm2 +1
= 50 PSI + 14
ACRILATO FD 265ºC +/-10ºC 15’ min 1' min 6 kg/cm2 +/- 1
= 86 PSI +/- 14
ACETAL AC
245ºC +/-5ºC 15’ min 1' min 6 kg/cm2 +/- 1
= 86 PSI +/- 14
OSSIS TI
390ºC +/-5ºC * * *

* Some injection parameters for OSSIS TI depend on the technique applied and the injector model. Refer to the complete technical instructions to see the different techniques, applications and parameters.

Injection parameters indicated for Deflex injection machine. For other injectors consult the manufacturer or supplier of the equipment.

Deflex Cartridges: presentation

Ready for injection!

The materials are presented in the form of small spheres or tablets.

Are pre-dried, colored and packaged in aluminum tubes.

Expiration date: 18 months

Why are they packaged in individual cartridges rather than in bulk?

  • In order to protect the material from moisture and impurities.
  • In order to optimize dental technician’s times, avoiding drying, cleaning, transfer and closing of tubes .

 

Diameters

Dimensions
Small x55mm
Medium x85mm
Large x120mm
Dimensions
Small x 50mm
Medium x70mm
Large x90mm

Diameter, measures and colors

Presentation M10 XR CLASSIC SR FLUENCE SR SUPRA SF ACRILATO FD ACETAL AC OSSIS TI
Measures Small
Medium
Large
Small
Medium
Large
Small
Medium
Large
Small
Medium
Large
Medium
Large
Small
Medium
Small
Medium
Large
Diameters 22mm / 25mm 22mm / 25mm 22mm / 25mm 22mm / 25mm 22mm /25mm 22mm /25mm 22mm /25mm
  Colors SP - TSP 
MP - TR
PP - SP - MP 
DP - TR
MP - TR MP MP - TR A2 - A3 - A3,5
B3 - C3 - RM
Beige
Pink
For very large prosthesis where the large cartridge is insufficient, consult for refill cartridges.
Ask for availability of materials, colors and complementary products by country.